Skip to main content

Radial Gauge visualization

Lisa Wong
Updated

Customize and edit a Radial Gauge chart visualization type.

The following options are available under each tab.

Tip: Customize and edit the selected visualization type in the Edit Tile dialog box by clicking Edit.

Plot

The following options are available in the Plot tab.

Note: To enable Show Totals or Show Row Totals in the Plot tab, Totals and Row Totals need to be selected respectively, in the Data table.
Options Description
Trellis By Creates multiple smaller charts each representing a single row or pivot and sorts it by Row or Pivot.
Trellis Rows/Columns Increase or decrease the number of trellis rows or columns.
Radial Gauge Angle Adjust the angle of the arc.
Radial Gauge Cutout Adjust the size of the cutout in the middle of the arc.
Range Min/Max Override Set the minimum and maximum values for the visualization.
Range Label Font Size Set the font size for the range labels.
Range Label Value Formatting Customize the formatting of the range labels. For example, enter 0.00 to display the range with two decimal places.
Spinner Type Select the design of the spinner. This identifies the location of the value being shown the way the speedometer has a pointer to display the current speed.
Arm Length Customize the length of the bottom of the arc.

Use the Thickness slider next to Arm Length to adjust the thickness of the arms.

Pointer Length Customize the length of the spinner.

Use the Thickness slider next to Pointer Length to adjust the thickness of the spinner.

Range Width Adjust how far the range label is from the arc.
Range Height Adjust how high the range label is from the bottom of the arc.

Style

The following options are available to customize the visualization:

Options Description
Gauge Fill Type Select the gauge fill type.
  • Progress: Fills in the progress with the Gauge Fill Color and fills the remainder of the arc with the Background Color.
  • Progress Segment: Fills in the progress with the first color in the Gauge Segment Colors and fills the remainder of the arc with the Background Color.
  • Segment: Fills in the entire arc with colors from the Gauge Segment Colors
Gauge Fill Color Select a custom color for the data point.
Gauge Segment Colors

Choose one of several existing palettes or create a custom palette in the Custom tab. The following options are available:

  • Type in a hex code or click Edit All to edit all hex codes at once.
  • Click the Color Wheel button and click into the color wheel to select a color.
  • The color's brightness can be adjusted with the slider at the bottom.
  • Click the Add or Remove buttons to add or remove more colors in the color range.
Background Color Select a custom color for the background.
Pointer Color Select a custom color for the spinner.
Range Label Color Select a custom color for the range labels.

Target

You can specify a target to show the goal or expected value for the metric you are visualizing. Users of the dashboard will be able to quickly see the current measured value compared to the target value.

The following options are available to customize the visualization:

Options Description
Target Source The selected target source appears in the visualization. The following options are available:
  • First Measure
  • Second Measure
  • Override
  • No Target
Note: Override allows you to manually specify the target value. A number needs to be entered in Target Value Override to use the Override option.
Target Label Type Customize the label displaying the target source.
Target Label Font Size Set the font size of the target label.
Target Value Override Set a custom target override number. This specifies the position of the target line on the visualization.
Target Label Override Customize the override label.
Target Value Formatting Specify the formatting of the target value. For example, enter 0.00 to display the target with two decimal places. This option only applies if you have First Measure or Second Measure selected, and not specified a Target Label Override.
Target Label Padding Adjust the spacing between the target label and the arc.
Target Length

Adjust the length of the dashes on the target line.

Dash Gap Set the gap between dashes forming the target line.
Thickness Set the thickness of the dashes.

Value

The following options are available to customize the visualization:

Options Description
Value Label Type Select from the list of label types at the bottom of the arc.
Value Label Font Size Set the font size of the value label.
Value Formatting Override Specify the formatting of the value. For example, enter 0.00 to display the value with two decimal places.
Value Label Override Set a custom value label to use. This only applies if you selected Value and Measure Label or Only Label in Value Label Type.
Value Label Padding Adjust the spacing between the bottom of the arc and the label.

NPS® drill down

If the visualization shows NPS℠1 Score data, users can drill down by clicking the NPS Score value. Up to 500 rows are displayed with the following information:

  • Date: The date the NPS response was recorded.
  • Respondent Member ID: The unique ID for the member.
  • Follow Up: The respondents' comments on the rating.
  • Response Status: The status of the survey (Complete, Incomplete, etc.).
  • Category: The NPS category of the response (Promoter, Passive, Detractor).
  • Median of NPS Response: The NPS score.

For more information, see Drilling into NPS score visualizations.

Related information
1 Net Promoter, NPS, and the NPS-related emoticons are registered U.S. trademarks, and Net Promoter Score and Net Promoter System are service marks, of Bain & Company, Inc., NICE Systems, Inc. and Fred Reichheld.

Related articles

Powered by Zendesk